British Only Forums
British Only Forums
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 British Motorcycle Forums
 BSA Motorcycles
 Mounting Header Pipes - '72 Lightning
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

f scott dundas

Australia
253 Posts

Posted - 06/18/2009 :  22:25:48  Show Profile  Reply with Quote
I am rebuilding my 1972 Lightning and have replaced the header pipes with a new set. They are a standard set of push in headers with a welded bracket that is held in place by the front engine mounting bolt. When I bolt them up they seem to sit to close to the frame. I cant remember if there is a spacer that sits between the bracket and frame lug to space the pipes out a touch or if the mounting bracket is just held in place by the front engine mounting bolt without any spacing. The parts book shows no spacers but it seems the only way to keep the pipes off the frame under the motor.Can anybody help?
Scott
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
British Only Forums © British Only Motorcycles & Parts Inc. Go To Top Of Page
This page was generated in 0.06 seconds. Snitz Forums 2000