British Only Forums
British Only Forums
Home | Profile | Register | Active Topics | Members | Search | FAQ
Save Password
Forgot your Password?

 All Forums
 British Motorcycle Forums
 Triumph Motorcycles
 Rear Wheel Bearing Removal
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  


22 Posts

Posted - 05/05/2013 :  00:05:09  Show Profile  Reply with Quote
I had a heck of a time trying to get the right rear wheel bearing out of the hub do to the speedometer driving sleeve or nut with two little 1/4" cut-outs on opposite sides of the sleeve or nut. I finally figured it out that it is reversed threads. I did not see in the work manuel that it was reversed threads. I have the standard rear wheel hub that is not the quick release type on a 1970 Bonney.

1970 T120R

f scott dundas

253 Posts

Posted - 05/05/2013 :  19:34:55  Show Profile  Reply with Quote
It sounds like you have a conical hub rear wheel.These were introduced for the 1971 oil in frame models and yes they are a left hand thread. Most of the hubs I have seen have LH stamped on them.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
British Only Forums © British Only Motorcycles & Parts Inc. Go To Top Of Page
This page was generated in 0.08 seconds. Snitz Forums 2000